Skip to content
Free shipping on every order in the lower 48
Free shipping, lower 48
York Barbell

York Barbell Rubber Training Bumper Plate Set Metric

$784.78

The York Barbell Rubber Training Bumper Plate Set Metric includes two each of 10, 15, 20 and 25 kg solid rubber plates, one 7 foot 20 kg needle bearing bar and a pair of Olympic spring collars. The eight plates total 140 kg; the bar adds 20 kg for the 160 kg set designation. Collar weight is additional and is not included in that calculation.

Each plate has a reinforced 2 inch steel center sleeve. The North American steel bar has 1.975 inch sleeves, needle bearings, and an end nut and spring pin sleeve attachment. Bar and plate substitutions are not available.

  • 160 kg set
    140 kg of plates plus a 20 kg bar; collars additional
  • Eight rubber plates
    Two each of 10, 15, 20 and 25 kg
  • Matched steel interface
    2 inch plate centers; 1.975 inch bar sleeves
  • Bar and collars included
    One 7 foot needle bearing bar and one pair of spring collars
Weight

Flexible Financing Options

Pay in 4 interest-free payments of $196.20 with Shop Pay, or from $70.83/mo est. 15% APR over 12 months

Plan Monthly Interest Total paid
  1. Add this product to your cart.
  2. At checkout, choose Shop Pay Installments as the payment method.
  3. Pick your plan: 4 interest-free payments or monthly financing up to 12 months.

Shop Pay Installments is provided by Shopify in partnership with Affirm, for US orders from $35 to $30,000. The estimate assumes 15% APR over 12 months; rates range from 0 to 36% APR. Subject to an eligibility check; your actual rate and plans are shown at checkout. Prices exclude tax and shipping.

Tax free (except CA)
30 day returns
Free USA shipping
1-year standard warranty

The York Barbell Rubber Training Bumper Plate Set Metric includes two each of 10, 15, 20 and 25 kg solid rubber plates, one 7 foot 20 kg needle bearing bar and a pair of Olympic spring collars. The eight plates total 140 kg; the bar adds 20 kg for the 160 kg set designation. Collar weight is additional and is not included in that calculation.

Each plate has a reinforced 2 inch steel center sleeve. The North American steel bar has 1.975 inch sleeves, needle bearings, and an end nut and spring pin sleeve attachment. Bar and plate substitutions are not available.

  • Offer: 160 kg metric bar and plate set, SKU 28054
  • Plate quantity: Eight solid rubber plates in four pairs
  • Plate weights: Two each of 10, 15, 20 and 25 kg
  • Total plate weight: 140 kg
  • Bar: One 7 foot men's needle bearing bar, 20 kg
  • Plate center sleeve: Reinforced steel, 2 inch
  • Bar sleeve diameter: 1.975 inch
  • Bar material: North American steel
  • Bar tensile strength: Minimum 170,000 PSI after heat treating; not a working-load rating
  • Sleeve rotation: Needle bearings
  • Sleeve attachment: End nut and spring pin
  • Collars: One pair of Olympic spring collars
  • Substitutions: No bar or plate substitutions
  • Two 10 kg rubber bumper plates
  • Two 15 kg rubber bumper plates
  • Two 20 kg rubber bumper plates
  • Two 25 kg rubber bumper plates
  • One 7 foot men's needle bearing bar, 20 kg
  • One pair of Olympic spring collars

Model-specific loading instructions, detailed care guidance and freight handling details are available from us on request. California residents: this item may be subject to Proposition 65.

1-year standard warranty. Full coverage terms and return details are available from us on request.

Availability:
In Stock, Ready to Ship

Compare models

York Barbell Metric Training Set against the other Weight Plates

Specifications as published by each manufacturer. Only models in stock are shown.

Swipe to compare models
SpecificationThis modelYork Barbell rubber training bumper plate set metric with eight plates, bar and spring collars York Barbell Metric Training Set York Barbell Rubber Training Bumper Plate Set: eight-plate 275 lb (b) package with bar and spring collar pair York Barbell Rubber Training Set York Barbell 29037 Legacy Olympic Plate Set with fourteen plates, a power bar and spring collars York Barbell 29037 Legacy York 2902 Legacy cast iron Olympic plate set with 14 plates, power bar and Quick Access collar pair York Barbell 2902
Price $784.78 From $733.82 $754.00 $839.99
Offer160 kg metric bar and plate set, SKU 28054–SKU 29037; named 300 lb Legacy Olympic set–
Bar sleeve diameter1.975 inch1.975 inches––
Bar materialNorth American steelNorth American steel–North American steel
Bar tensile strengthMinimum 170,000 PSI after heat treating; not a working-load ratingMinimum 170,000 PSI after heat treating; not a working-load rating––
CollarsOne pair of Olympic spring collars–One pair of Olympic spring collars–
SubstitutionsNo bar or plate substitutionsNo bar or plate substitutions––
Plate material––Cast ironCast iron
Shipping weight––300 lbs400 lb (shipment figure)
ShopAdd to cartView detailsView detailsView details

See every model on the Weight Plates page. Ask our team for the full spec sheet for any machine.

Close-up illustration of the metric training set's black rubber plate rim and surface

Solid rubber plates

The set contains two each of 10, 15, 20 and 25 kg solid rubber bumper plates.
Close-up illustration of the reinforced steel center sleeve around the bar in a rubber plate

Reinforced steel centers

Each rubber plate has a reinforced 2 inch steel center sleeve.
Close-up illustration of the steel shaft on the included York Barbell training bar

Steel training bar

The 7 foot, 20 kg men's needle bearing bar is made from North American steel.
Close-up illustration of the included spring collar on the bar sleeve

Included spring collars

One pair of Olympic spring collars is supplied with the bar and eight plates.

Getting started

Near-side stack of rubber bumper plates and spring collar on the included bar

1 - Check the set contents

Unpack the plates, bar and spring collars and compare them with the contents listed for your selected set.
Far-side rubber plates and the steel shaft of the York Barbell metric training set

2 - Prepare the bar and plates

Place the bar in a suitable loading position on a level surface and select the plates you intend to use.
York Barbell rubber training bumper plate set metric with eight plates, bar and spring collars

3 - Load and secure the plates

Follow the included instructions to load the bar evenly and secure the plates with the supplied spring collars before use.

Specifications and details

Set specifications

Set specifications
Offer160 kg metric bar and plate set, SKU 28054
Plate quantityEight solid rubber plates in four pairs
Plate weightsTwo each of 10, 15, 20 and 25 kg
Total plate weight140 kg
BarOne 7 foot men's needle bearing bar, 20 kg
Plate center sleeveReinforced steel, 2 inch
Bar sleeve diameter1.975 inch
Bar materialNorth American steel
Bar tensile strengthMinimum 170,000 PSI after heat treating; not a working-load rating
Sleeve rotationNeedle bearings
Sleeve attachmentEnd nut and spring pin
CollarsOne pair of Olympic spring collars
SubstitutionsNo bar or plate substitutions

Bar length and plate interface

Bar length and plate interface
Bar length7 foot
Bar sleeve diameter1.975 inch
Plate center sleeve2 inch reinforced steel
Plate diameter and thicknessWeight-specific measurements are available from us on request.

Included in the 160 kg set

Included in the 160 kg set
Two 10 kg rubber bumper plates
Two 15 kg rubber bumper plates
Two 20 kg rubber bumper plates
Two 25 kg rubber bumper plates
One 7 foot men's needle bearing bar, 20 kg
One pair of Olympic spring collars

California notice

California notice
California residentsThis item may be subject to Proposition 65.

Warranty and returns

Warranty and returns
Standard warranty1 year
Coverage and returnsFull warranty terms and return details are available from us on request.

FAQs

What comes in the 160 kg set?
The set includes two each of 10, 15, 20 and 25 kg solid rubber bumper plates, one 7 foot 20 kg men's needle bearing bar and one pair of Olympic spring collars.
Does 160 kg mean the plates weigh 160 kg?
No. The eight plates total 140 kg. Adding the 20 kg bar gives the 160 kg set designation. The collars are also included, but their weight is additional to this calculation.
What plate and bar interface does this set use?
Each plate has a reinforced 2 inch steel center sleeve. The included bar has 1.975 inch sleeves machined for 2 inch Olympic plates.
How is the included bar constructed?
The 7 foot, 20 kg bar uses North American steel with a minimum 170,000 PSI tensile strength after heat treating. Needle bearings provide sleeve rotation; an end nut and spring pin secure each sleeve.
Can I change the plates or bar in this set?
Bar and plate substitutions are not available for this set. The 160 kg option supplies pairs of 10, 15, 20 and 25 kg plates with the 20 kg bar and Olympic spring collars.
What warranty applies?
The set has a 1-year standard warranty. Full coverage terms, detailed care guidance and return details are available from us on request.
Where can I find longevity devices similar to the York Barbell Metric Training Set?